beiye

Clamp on Stair Edge Protection System

Clamp on Stair Edge Protection System Banner
Safety Clamp on Stair Edge Protection Systems for Precast Concrete Staircases
There is an obvious risk that your operatives may fall from the staircase if a staircase is not equipped with temporary edge protection. APAC has developed a complete temporary clamp on stair edge protection system.
Our edge protection system can be clamped on the stringers of the staircase, it is very quick to erect and dismantle. It avoids any time delay and saves money for your project.
APAC Clamp on Stair edge protection system has been designed with workers’s safety in mind. The system has been designed with ease of installation and removal of the system in mind and is a significant improvement on the traditional stair handrail system.
We are constantly improving our stairway edge protection system. We provide maximum value and performance for our customers.
Our Clamp on Stair Edge Protection system allows easy access during construction. By installing a clamped temporary edge protection system on the stairs, contractors can save valuable man-hours for employees climbing ladders.
Buying an APAC clamp on edge protection system can avoid expensive rental costs and improve your bottom line. Instead of paying monthly rent, you can save time and money by adding our temporary stairway edge protection system to your bid.
With APAC’s Clamp on Stair Edge Protection systems, your operatives no longer need to use safety ropes in stairwells. Our Clamp on Stair Edge Protection System does not require slab penetration. The system is interchangeable with flexible adjustment, Suiting any staircase profile, in-situ, pre-cast, or steel.
APAC Clamp on Stair Edge Protection System is made up of three components: 1.Stair Clamp 2.Stair Post 3.Link Bar/Handrail
APAC specially designed the stair clamp for the staircase. You can easily mount our stair clamp to a staircase, and the stair clamp can provide a strong grip to secure itself to the stairs.
Once the stair clamp is fitted, you can install the stair safety post and handrails. The Stair clamp has a Mechanical Clamp for fast adjustment. The maximum spacing of two stair clamps is 2.5m, meets all applicable OSHA, ANSI, and EN 13374 standards.
Stair Safety posts help to meet the stringent health and safety regulations imposed on construction sites, which require the installation of a protective stair barrier for works carried out at height. Each post is made from a 48mm round section and is connected to the stair clamps using pins or integrated pins.
APAC handrails for the clamp on stair system are also called Link Bars. They are adjustable from 0.8m-1.5m or 1.5m-2.5m, you can fit them to stair safety posts by the latch pin. As the main component for our clamp on edge protection system, it provides a strong safety railing during construction.
Protecting stairs can be a challenging task as stair sizes can vary considerably. All our clamp on stair edge protection solutions is equipped with unique telescopic handrails /link bars. It means you no need to cut traditional tubes to the required size.
APAC provides temporary edge protection for stairs, stair landings, and other hazardous areas during your building construction site. Contact our representative for more details.

Components

  • Collective EN13374 Edge Protection Stair Clamp for Stairway

    Collective EN13374 Edge Protection Stair Clamp for Stairway

    The Stair Clamp is used as a clamp for temporary edge protection on stairs. By using this clamp, the process of drilling holes can be eliminated when installing edge protection.

    The Stair Clamp can be swiveled and rotated and can be installed with a simple operation without damaging the stair surface. The clamp has an integrated bracket for Safedge post 1.2m and the adjustable handrails are installed on the posts.

    Specific Stair clamping devices during the production phase of the staircase greatly improve the quality and safety of this method. Staircase protection stair clamp and other components comply with BS EN 13374.

  • HSE Safety Post 1.2m Construction Leading Edge Protection

    HSE Safety Post 1.2m Construction Leading Edge Protection

    Safedge posts 1.2m are the vertical component of our Safedge Bolt Down edge protection system.

    Our Safedge Bolt Down edge protection systems and components are designed and manufactured in accordance with EN 13374 and AS/NZS 4994.1 standards.

    The Edge Protection Safedge Post 1.2m is integrated with two latch pins for locking the mesh barrier in position. This design allows you not to use additional mesh barrier clips. Also, the special locking mechanism makes the post-installation very easy and fast.

    The hot-dipped galvanized Edge Protection Safedge Post 1.2m gives you a durable edge protection system for the long term.

    Please send us your Edge Protection Safedge Posts requirements for competitive pricing.

  • Adjustable Link Bar Handrail for Stairwell Edge Protection

    Adjustable Link Bar Handrail for Stairwell Edge Protection

    Adjustable Handrails are an integral part of our edge protection systems. They are used to set up collective fall protection for stairs, shafts, and openings.

    Wall openings can be secured with edge protection by using wall brackets on each side of the opening to which the adjustable handrail is then mounted.

    The Adjustable Handrails are available in two different sizes, 0.9m-1.5m, and 1.5m-2.5m, thus accommodating openings from 0.9m to 2.5m.

    This adjustable handrail edge protection solution makes it easy to remove and put back the fall protection when carrying out various types of work, while also leaving space for different types of lead-in devices.