beiye

I-Beam Clamp Barrier System

I-Beam Clamp Barrier System Banner
Popular I-Beam Clamp Barrier Systems for Your Business
APAC manufactures the most cost-effective I-Beam Clamp barrier systems for steel structures edge protection. The I-Beam Clamp Beam clamps are attached to I-beams in steel buildings under construction for the installation of a construction safety fence.
On flanged steel beams, steel I-beam clamps can be fitted to allow the quick creation of barrier edge protection attachments. This will create a free surface on the plate that can be used for other work zones.
APAC I-Beam Clamp Barrier Systems consists of three parts: 1.Steel I-Beam Clamp 2.Safety Safedge Post 3.Safety mesh barrier 2.6m
The I-Beam clamps are designed with gripping jaws for steel beam profiles. The steel I-beam clamps have an integrated attachment for the post. Mesh Barrier 2.6m is mounted directly on the post lock and its height can be easily adjusted to facilitate different work zone.
APAC I-Beam Clamp Barrier systems are compatible with a wide range of steel construction sites. It is an ideal edge protection system suitable for steel frame structures.
The I-Beam clamp barrier system can be calibrated horizontally and vertically to suit the edge protection requirements for all complex steel structures.
As a leading manufacturer and supplier of I-beam Clamp barrier edge protection systems, our I-Beam Clamp has an advanced design for all phases of steel construction. From fabrication stage by welding pre-mounted sockets, through to post drilling and bolting using our advanced I-Beam attachments.
APAC offers highly engineered I-Beam Clamp Barrier Systems with an impeccable safety record in accordance with OSHA, EN 13374:2013 and AS/NZS 4994.1.
The I-Beam Clamp Barrier edge protection also called flange clamp edge protection, The system is extremely flexible. It does not rely on physical fixing. Therefore, it does not require any fixing holes or sacrificial sockets.
APAC’s I-beam clamps are clamped to the bottom flange of the steel beam by means of a screw adjustment. Our mesh barrier systems are connected to the steel structure by the Flange Clamp, It is a collective safety edge protection system designed for your project.
Through years of experience and intelligent design, APAC’s I-Beam Clamp Barrier systems are some of the most versatile and robust on the market.
The quickest to install and uninstall, our I-Beam Clamp Barrier system will keep your workers safe and save you time and money on your project.
The APAC I beam clamp barrier system provides better protection for your site. Whether for your business or project, choose APAC as your top supplier.
We offer safety and protection solutions for your work on steel structures. Over the past 7 years, we have developed extensive knowledge and understanding of your needs. Therefore, we produce a wide range of edge protection products to meet your expectations. APAC is undoubtedly the trusted manufacturer of I-Beam Clamp Barrier Edge Protection Systems!
As the professional and preferred choice for running your business, we at APAC have the complete range of features to support your business and meet your requirements for construction site safety. We ensure that our equipment and facilities are fully equipped to produce I Beam Clamp Barrier Systems easily and quickly using high-tech machinery.
Request a quote for your next I-Beam Clamp Barrier Systems orders!

Components

  • Steel I Beam Clamp for Steel Frame Structures Edge Protection

    Steel I Beam Clamp for Steel Frame Structures Edge Protection

    APAC has designed the most advanced edge protection safety solution suitable for steel structure installation. Using our advanced adjustable Steel I-Beam Clamps can greatly improve installation efficiency.

    APAC has designed the Steel I-Beam Clamp in accordance with EN 13374 and AS/NZS 4994.1.

    The steel I-beam clamps are integrated into the brackets used to fix the 1.2m Safedge Posts.

    In addition, APAC’s steel I-beam clamp has screw jacks welded to the body to ensure that it can be adapted to fit I-beams from 100 mm to 310 mm in width. The 1.2m flute mounted on the body makes it possible to fit I-beams up to 990mm.

  • HSE Safety Post 1.2m Construction Leading Edge Protection

    HSE Safety Post 1.2m Construction Leading Edge Protection

    Safedge posts 1.2m are the vertical component of our Safedge Bolt Down edge protection system.

    Our Safedge Bolt Down edge protection systems and components are designed and manufactured in accordance with EN 13374 and AS/NZS 4994.1 standards.

    The Edge Protection Safedge Post 1.2m is integrated with two latch pins for locking the mesh barrier in position. This design allows you not to use additional mesh barrier clips. Also, the special locking mechanism makes the post-installation very easy and fast.

    The hot-dipped galvanized Edge Protection Safedge Post 1.2m gives you a durable edge protection system for the long term.

    Please send us your Edge Protection Safedge Posts requirements for competitive pricing.

  • Edge Protection Construction Fence Panel Mesh Barrier 2.6m

    Edge Protection Construction Fence Panel Mesh Barrier 2.6m

    Safedge safety mesh barriers 2.6m are system protection barriers with mesh infill. You can customize Safedge mesh barriers for your edge protection demand.

    APAC is the most professional manufacturer of safedge mesh barrier 2.6m in China and the products are appreciated by customers.

    Safedge Safety Mesh Barrier 2.6m integrates a frame, infill mesh, and toe board. safedge Safety Mesh Barrier 2.6m’s robust design ensures that the system not only meets but also exceeds many safety standards such as EN13374 Class A, AS/NZS 4994.1.

    The Safedge Safety Mesh Barrier 2.6m in hot-dipped galvanized with a powder coating finish extends the life of the edge protection system and prevents corrosion.

    Please send your Safedge safety mesh barrier requirements for competitive pricing.

  • Factory Supply Mesh Barrier 1.3m Construction Safety Fence

    Factory Supply Mesh Barrier 1.3m Construction Safety Fence

    APAC Safedge Mesh Barrier 1.3m is Edge Protection Parts. It is guardrail Elements of the Edge Protection System.

    You can use APAC Safedge Mesh Barrier in our Bolt Down Edge Protection System, Slab Grab Edge Protection System, Slab Edge Bracket Edge Protection System, Stair Edge Protection, Steel Frame Edge Protection, and Formwork Edge Protection System.

    APAC is the Safedge Mesh Barrier expert Manufacturer. Our Safedge Mesh Barrier 1.3m Steel Production is According to ISO9001 Quality Controlling System. In safety regulation, APAC’s Safedge Mesh Barrier are conformed to EN 13374, AS 4994, and OHSA standards.

    Send Us Your Safedge Mesh Barrier Requirement to Get Latest Price from APAC.