beiye

APAC provides new cost-saving edge protection for Gulf countries

In order to provide Middle Eastern countries with affordable fall protection equipment designed and manufactured by APAC. We have redesigned an edge protection system to meet the safety requirements, which also meets the EN 13374 Class A standard, to protect workers from falling from heights and to reduce the risk of safety accidents and protect the lives of site personnel.

2.5m Edge Protection System from APAC Builders Equipment

We have combined the base and the uprights into a single Post with bottom attachments, which allows for a significant reduction in production costs without compromising on safety.

1. APAC Barrier
The mesh barrier follows the design of the safedge mesh barrier, with a welded square tube frame on the outside and a infilled mesh welded from wire on the inside, as well as an integrated Toe board on the bottom. You are available with two mesh lengths, 1.25m and 2.5m.

new cost-saving mesh Barrier
2.Post with bottom attachments
We have combined the base and the uprights into a single Post with bottom attachments, which allows for a significant reduction in production costs without compromising on safety.
A nut is welded in the middle of the bottom of the post and a double M16 bolt is used to attach to it. When you install the post you can pre-install expansion anchors in the cement and then attach the bottom M16 bolt to the anchor by turning the post clockwise. You can also choose not to use the M16 double stud and instead bolt the column to the cement through the hole in the edge of the post base plate.

Edge Protection Post 1.1m

The mesh barrier is also very easy to fix, you may notice that we have welded 2 locks on the post already, pulling out the locking pin and rotate it to horizontal, you can then put the mesh on the locking, then rotate the locking pin and retract it to vertical, so the mesh barrier is fixed to the post.


Post time: Mar-23-2022