beiye

Socket Base Stairway Edge Protection System

Socket Base Stairway Edge Protection System Banner
Your Dependable Socket Base Stairway Edge Protection System Manufacturer & Supplier
It is a common understanding that stairs need guardrails or handrails for edge fall protection. But how do you ensure the safety of your workers when you build staircases? For example, stairways are built and used on construction sites.
During the construction phase, stairs are very common walking surfaces on construction sites. the APAC socket base stairway edge protection system protects workers when they are using stairs.
Falls from stairs can result in serious injury or even death, so you must use stairway edge protection systems at the work zone. The systems will protect workers from the risk of slipping, tripping, and falling on any walking/working surface.
APAC Socket Base Stairway Edge Protection System typically consists of:
1.Socket Base 2.Safety Post 3.Handrails/Adjustable Link Bars
For safety, stairs shall be equipped with at least one handrail and one stairway system. The Socket Base Stairway Edge Protection System should be provided along each unprotected side or slab edge.
It is the employer’s responsibility to ensure that all stairs used at the work zone are safe. Workers should alert management to any unsafe problems or potential hazards found on or near the stairs.
APAC Socket Base Stairway Edge Protection offers an unparalleled systemized solution specifically designed to work with edge-protected platforms to provide superior continuous edge protection.
Temporary protection of stair edges during construction was previously both complex and expensive. The varying nature of stairs, landings, and returns often required many cutting tubes, sharp ends, and many specially constructed protections. APAC Socket Base Stairway Edge Protection is designed to solve these problems by providing a systematic solution. The system complies with EN 13374 Class A.
When installing the APAC Socket Base Stairway Edge Protection system, you need to mount the socket base to the top of the stair slab first, then fit the stair safety post to the socket base, at last,you need to fit the handrails/ our adjustable link bars to the stair safety posts.
Our handrails/ our adjustable link bars for the socket base stairway edge protection are adjustable from 1.5m to 2.5m, along with the 0.8m-1.5m adjustable link bars per your special requirements.
As a leading stair edge protection system manufacturer and supplier in China, the socket base solution for stairways is an excellent protection system for safety on your construction sites.
The socket bases, link bars, and stair safety posts for the stairway edge protection system are hot-dipped galvanized surface finishing. Robust and durable unit with long life and high return on investment.
You can Use APAC’s Socket Base Stairway Edge Protection System in all types of concrete, timber, or steel stairs.
As a Socket Base Stairway Edge Protection System factory in China, we not only offer a complete range of edge protection for you to choose from but also bring you competitive prices. What’s more, you can get free design and OEM services here.
Send us your request for pricing on our Socket Base Stairway Edge Protection systems and components today.

Components

  • Socket Base

    Socket Base

    The socket base is the base component of the Safedge Bolt Down Edge Protection System. Edge Protection Socket bases are typically anchored into the concrete slab. APAC is an edge protection socket base Manufacturer In China. We Produce Edge Protection Socket Base according to EN 13374 Class A & Class B, AS/NZS 4994.1, and OHSA standards.

    You can install APAC’s edge protection socket base on any concrete surface either at a pre-cast stage using inserts or by drilling. We customize your edge protection socket base according to your construction design too.

    Send Us Your Edge Protection Socket Base Requirement to Get Competitive Price.

  • HSE Safety Post 1.2m Construction Leading Edge Protection

    HSE Safety Post 1.2m Construction Leading Edge Protection

    Safedge posts 1.2m are the vertical component of our Safedge Bolt Down edge protection system.

    Our Safedge Bolt Down edge protection systems and components are designed and manufactured in accordance with EN 13374 and AS/NZS 4994.1 standards.

    The Edge Protection Safedge Post 1.2m is integrated with two latch pins for locking the mesh barrier in position. This design allows you not to use additional mesh barrier clips. Also, the special locking mechanism makes the post-installation very easy and fast.

    The hot-dipped galvanized Edge Protection Safedge Post 1.2m gives you a durable edge protection system for the long term.

    Please send us your Edge Protection Safedge Posts requirements for competitive pricing.

  • Adjustable Link Bar Handrail for Stairwell Edge Protection

    Adjustable Link Bar Handrail for Stairwell Edge Protection

    Adjustable Handrails are an integral part of our edge protection systems. They are used to set up collective fall protection for stairs, shafts, and openings.

    Wall openings can be secured with edge protection by using wall brackets on each side of the opening to which the adjustable handrail is then mounted.

    The Adjustable Handrails are available in two different sizes, 0.9m-1.5m, and 1.5m-2.5m, thus accommodating openings from 0.9m to 2.5m.

    This adjustable handrail edge protection solution makes it easy to remove and put back the fall protection when carrying out various types of work, while also leaving space for different types of lead-in devices.